Once you have been notified that a new printing device is on campus, please follow the steps below:

  1. Contact hostmaster@uiowa.edu and request an LSA IP address. Information to provide:
    1. Building and room# where the device will be located
    2. Jack/port the device will use
    3. Host name (e.g. deptname-konica.iowa.uiowa.edu)
    4. If this is not replacing a current print device, you will need to request the network port be switched to LSA.
  2. Once you have your IP address and have made sure the jack is set to LSA:
    1. Configure the printer with the IP information hostmaster@uiowa.edu sent. If you need help, request assistance from its-etm@uiowa.edu.
    2. Request a new print queue by filling out the Print Queue Form
    3. Secure the device. If you need help, request assistance from its-etm@uiowa.edu.
  3. Once the print queue has been created, you will be notified.
Article number: 
104302
Last updated: 
May 19, 2016